 |
AHP 52.4mm High Compression Piston Kit (13mm pin) Fits the
following bikes...
Pitster Pro 124cc (52.4 x 57mm stroke)
Xtreme pit pro 107cc (52.4 x 49.5mm stroke)
Xtreme pit pro crII 124cc (52.4 x 57mm stroke)
Xtreme pit pro crIII 124cc (52.4 x 57mm stroke)
Icon 90 with 107cc nikisol cylinder kit (52.4 x 49.5mm stroke)
Sikk MX 107cc (52.4 x 49.5mm stroke)
Stock Honda with AHP 107cc nikisol cylinder stroker kit (52.4 x
49.5mm)
Thumpstar
SSR
SDG - Available under "SDG Parts" for the 3v Head and SDG 125 as
well!
Piston kit comes complete with gaskets, rings, circlips, wrist
pin, and piston. Compression ratio on this kit is 12.5:1 over
the stock ratio of 9:1 |
$70.00
|
 |
AHP INNER ROTOR KIT Eliminate the weight of your flywheel
and let your motor really twist like a 2-stroke. Kit allows you
to set and build in timing into your motor. This unit is good up
to 15,000 RPM's. The inner rotor kit includes everything needed
to install simply remove your stock flywheel and stator plate
with wiring and set this IRK in its place. Set the distance in
between pickups and rotor with a business card for the easiest
installation. You will use the rev box that comes with this kit
and your stock ignition coil.
Fits all Honda CRF50 and 70 motors, Jialing, Lifan, GPX, Sikk,
Thumpstar, Pitster, RCM, MotoVert, Etc.
Wiring setup:
White to brown Black to red Both green wires to coil Yellow wire
to coil
|
$150.00
|
 |
AHP Head Breather Kit KLX / YX150 Black/>
Complete billet anodized head breather kit for your KLX and
DRZ110.These will also fit any aftermarket KLX head, as well as
the YX / GPX / OGM 150 and 160cc engines. Available in black and
red. These breathers help vent the extra pressure your motor is
producing as well as get some trapped heat out of the top end of
your motor, as an extra bonus they look really nice, and
compliment any other billet covers really well. Comes complete
with billet breather, steel braided hose, ties, and new o-ring.
Fits:
Kawasaki KLX 110
Suzuki DRZ 110
Pitster with GPX 150 or 160cc engines
OGM 150cc
YX 150cc
YX 160cc
Takegawa +R Head
Kitaco Head
TB KLX Race Head
TB V2 Roller Rocker Race Head
Any other KLX style head
|
$39.00
|
 |
|
$29.95
|
 |
AHP Head Breather Kit CRF - XR 50
This is a complete, billet, anodized head breather kit for your
50, 70, AHP, or any other motor that fits into the Honda 50
category.
These things are pretty much a must on any motor 88cc and above
to help vent the extra pressure your motor is producing, as an
extra bonus they look really nice, and compliment any other
billet covers really well. Available in Red, Black, and Blue.
|
$26.00
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
