RC Pitlane and Hobbies. Buy FLM and Traxxas Parts here

	Aluminum Tranny Case FLM20000 Made from aircraft quality aluminum for durability and strength. CNC Machined for exact tolerances Replaceable Nitro style arm mounts Includes 1 degree arm mounts Now inclued wheelie bar mount Requires slight mod. to stock chassis (you will need to remove 1/16" from the nubs that stick up at the rear of the chassis) $54.00 Quantity:
	Aluminum Tranny Case FLM20500 Machined from billet 6061 aluminum CNC machined to exact tolerances Designed to use Nitro style arm mounts Includes 4 degree arm mounts and all necessary hardware for a direct fit 4 degree arm mounts represent the amount of toe in or out, typically with more toe in,the truck under hard acceleration will move in a straight line therefore making it easier to control Requires slight mod. to stock chassis (you will need to remove 1/16" from the nubs that stick up at the rear of the chassis) Now inclued wheelie bar mount $54.00 each Quantity:
	FLM21000 Rear Adjustable Arm Mount 1 deg Fits FLM Tranny cases 1 degree arm mount works well for straight line speed. But you will suffer in the traction department. When exiting a corner or under full throttle take offs, the rear wheels once they have lost traction will cause the rear end to kick out to one side or the other. $12.50 a set Quantity:
	FLM21010 Rear Adjustable Arm Mount 4 deg 4 degree arm mount works well for carrying a straight line under heavy acceleration. But you will suffer in the top speed department. When exiting a corner or under full throttle take offs, the rear wheels are angled in 4 degrees to help keep the r/c in a straight line when the tires break loose. $12.50 a set Quantity:
	SS Chassis FLM22600 Machined from billet 6061 aluminum CNC machined to exact tolerances Stock replacement chassis Includes front skid, tower brace, battery straps and all necessary hardware $54.00 each Quantity:
	Extended SS Chassis FLM22800 Machined from billet 6061 aluminum Chassis was stretched 1.00"(25.4mm) Includes front skid, tower brace, battery straps and mounting hardware for a direct fit $59.00 each Quantity:

	Upper Chassis Machined from billet 6061 aluminum Greatly enhances strength Includes bellcrank posts, servo mount and all necessary hardware for a direct fit Will fit all electric Rustler chassis Only works with FLM or stock bellcranks. Traxxas alluminum bellcranks don't clear the servo mount. FLM22610 $30.00 each Quantity:
	Front Shock Tower Made from aircraft quality aluminum for durability and strength. CNC Machined for exact tolerances Multiple shock mount locations Repalcement cost $6.00 Fits Nitro/Electric Rustler and Stampede FLM25000 $17.00 Quantity:
	Electric Rear Shock Tower Made from aircraft quality aluminum for durability and strength. CNC Machined for exact tolerances Multiple shock mount locations Repalcement cost $6.00 Fits Nitro/Electric Stampede and Electric Rustler FLM22500 $24.00 Quantity:
	Extended Front A-Arms Extended .320 and .500 for the ultimate in handling Has extra shock positions Lightweight Durable Repalcement cost/arm: $5.00 Fits Nitro/Electric Rustler and Stampede Requires turnbuckle rod ends for upper links Also require FLM Castor Blocks or that you drill out electric stock casters for the larger pins Comes with all four pins FLM24100 $21.00 Quantity:
	Electric Caster Blocks Made from aircraft quality aluminum for durability and strength. CNC Machined for exact tolerances Replaces the stock c-hub FLM27500 $15.00 Quantity:
	Front Skid Plate Machined from billet 6061 aluminum 3mm thick Full bulk coverage FLM24600 $7.50 Currently Not Stocked
	Electric Arm Set Fronts extended Made from aircraft quality aluminum for durability and strength. CNC Machined for exact tolerances Multiple shock mount locations Front arms are extended with 2 different holes for extension (pin to pin 3.075 and 3.250 inches) Rear arms are stock length (pin to pin 3.635 inches) Kit includes everything pictured along with hardware FLM24800 $48.00 Quantity:
	Extended Electric Arm Conversion Made from aircraft quality aluminum for durability and strength. CNC Machined for exact tolerances Multiple shock mount locations Front arms are extended with 2 different holes for extension (pin to pin 3.075 and 3.250 inches) Rear arms are extended (pin to pin 4.000 inches) Kit includes everything pictured along with hardware FLM24900 $48.00 Quantity:
	Adjustable Front Bulkhead FLM24500 Machined from billet 6061 aluminum Adjustable design allows an extra .200"(5mm) wheelbase Replaces weak stock bulk Heavy Duty design Includes all necessary hardware for a direct fit $24.00 each Quantity:
	Steering Bell Crank FLM28500 Machined from billet 6061 aluminum Replaces stock bellcranks Greatly enhances durability Bearings are highly recommended but not necessary Includes mounting hardware $19.00 per set Quantity:
	Drag Link FLM27510 Machined from bilet 6061 aluminum Black pieces in photo are steel bushings for smooth steering and long life Includes all necessary mounting hardware Replaces stock drag link $7.50 each Quantity:
	Electric Extended Arm Driveshaft Kit FLM26710 Driveshafts are machined from 7075 aluminum Drivecups are machined out of a high wear resistant alloy steel then hardened for long life Axles are machined from high strength steel Drive hexs are machined from billet 6061 aluminum Includes all necessary hardware This kit is for the FLM24900 Arm Kit Drive axles are a heavy duty design, what we did was increase the axle size from 5mm to 6mm for strength. We include an aluminum hex nut for a no fuss install $39.00 per kit Quantity:
	Electric Extended Arm CVD Kit FLM26715 CVDs and axles are machined out of a high strength steel Drive cups are machined out of a high wear resistant alloy steel and then hardened for long life Drive hexs are machined from 6061 aluminum Fail safe pin design, retaining ring holds pin in place to keep it from coming out Designed to last with super smooth operation These fit the FLM24900 arm kit Drive axles are a heavy duty design, what we did was increase the axle size from 5mm to 6mm for strength. We include an aluminum hex nut for a no fuss install Includes all necessary hardware for easy installation $44.00 per kit Quantity:
	Rear Bearing Carriers FLM26900 Machined from billet 6061 aluminum Includes all necessary hardware for an easy installation $18.00 pair Quantity:
	FLM25550 Made in the USA CNC Machined frombillet 6061 aluminum Supports shock tower Works best with FLM tower Quantity:
	Motor Guard/ Wheelie Bar Mount FLM20700 Machined from billet 6061 aluminum Desigend to fit on FLM tranny case Will allow the use of Traxxas wheelie bar Protects motor Includes all necessary mounting hardware $11.00 each Quantity: