 |
Aluminum Tranny Case
-
Made from aircraft quality aluminum for
durability and strength.
-
CNC Machined for exact tolerances
- Nitro style replaceable arm
mounts
- Includes 1 degree arm mounts
-
Now inclued wheelie bar mount
FLM20000
$54.00
|
|
|
Aluminum Tranny Case
-
Made from aircraft quality aluminum for
durability and strength.
-
CNC Machined for exact tolerances
- Nitro style replaceable arm
mounts
- Includes 4 degree arm mounts
-
Now inclued wheelie bar mount
FLM20500
$54.00
|
 |
FLM21000
Rear Adjustable Arm Mount 1 deg
Fits FLM Tranny cases
1 degree arm mount works
well for straight line speed. But you will suffer in the
traction department. When exiting a corner or under full
throttle take offs, the rear wheels once they have lost
traction will cause the rear end to kick out to one side or
the other.
$12.50 a set
|
|
|
FLM21010
Rear Adjustable Arm Mount 4 deg
4 degree arm mount works
well for carrying a straight line under heavy acceleration.
But you will suffer in the top speed department. When
exiting a corner or under full throttle take offs, the rear
wheels are angled in 4 degrees to help keep the r/c in a
straight line when the tires break loose.
$12.50 a set
|
 |
Stampede Super Chassis
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
- Lightweight (lighter than
stock chassis)
- 6mm thick to reduce
chassis flex
FLM22200
$35.00
|
 |
Extended Stampede Super Chassis
-
Made from aircraft quality aluminum for durability
and strength.
-
CNC Machined for exact tolerances
- Extended 25mm for
better control
- Will accept T-Maxx
style bodies
- Lightweight
(lighter than stock chassis)
- 6mm thick to
reduce chassis flex
FLM22300
$44.00
|
 |
Stampede Chassis Braces
-
Made from aircraft quality aluminum for durability
and strength.
-
CNC Machined for exact tolerances
- Strengthens
Chassis
- Enhances looks
- Machined for our
super chassis
FLM22400
$29.00
|
 |
Front
Shock Tower
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations
-
Repalcement cost $6.00
-
Fits Nitro/Electric Rustler and Stampede
FLM25000
$17.00
|
 |
Rear
Shock Tower
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations
-
Repalcement cost $6.00
-
Fits Electric Stampede and Electric Rustler
FLM22500
$24.00
|
 |
Electric Extended Arm CVD Kit FLM26715
-
CVDs and axles are
machined out of a high strength steel
-
Drive cups are
machined out of a high wear resistant alloy
steel and then hardened for long life
-
Drive hexs are
machined from 6061 aluminum
-
Fail safe pin
design, retaining ring holds pin in place to
keep it from coming out
-
Designed to last
with super smooth operation
-
These fit the
FLM24900 arm kit
-
Drive axles are a
heavy duty design, what we did was increase the
axle size from 5mm to 6mm for strength. We
include an aluminum hex nut for a no fuss
install
-
Includes all necessary hardware for easy
installation
$44.00
per kit |
 |
Front Skid Plate
FLM24600
$7.50
|
 |
Extended Front A-Arms
-
Extended .320 and .500 for the ultimate in handling
-
Has extra shock positions
-
Lightweight
-
Durable
-
Repalcement cost/arm: $5.00
-
Fits Nitro/Electric Rustler and Stampede
-
Also require FLM Castor Blocks or that you drill out
electric stock casters for the larger pins
-
Comes with all four pins
FLM24100
$21.00
|
 |
Electric Caster Blocks
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
- Replaces
the stock c-hub
FLM27500
$15.00
|
 |
Extended Rear A-Arms
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations
-
Pin to pin 4.000 inches
FLM26700
$24.00
|
 |
Electric Arm Conversion Fronts
Extended
-
Made from aircraft quality aluminum for
durability and strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations
-
Front arms are extended with 2 different holes
for extension (pin to pin 3.075 and 3.250
inches)
- Rear arms
are extended (pin to pin 3.635 inches)
- Kit includes
everything pictured along with hardware
FLM24800
$48.00
|
 |
Extended Electric Arm Conversion
-
Made from aircraft quality aluminum for
durability and strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations
-
Front arms are extended with 2 different
holes for extension (pin to pin 3.075 and
3.250 inches)
- Rear arms
are extended (pin to pin 4.000 inches)
- Kit
includes everything pictured along with
hardware
FLM24900
$48.00
|
 |
Adjustable
Front Bulkhead
-
Made from billet 6061 aluminum
-
Has extra holes for an extra .200 in wheelbase
-
Lightweight design
-
Durable
- Fits Nitro/Electric
Rustler and Stampede
FLM24500
$24.00
|
 |
Rear
Bearing Carriers FLM26900
$18.00 pair
|
 |
Motor Guard/ Wheelie
Bar Mount FLM20700
-
Machined from billet 6061
aluminum
-
Desigend to fit on FLM
tranny case
-
Will allow the use of
Traxxas wheelie bar
-
Protects motor
-
Includes all necessary
mounting hardware
$11.00 each
|
 |
FLM25550
- Made in the USA
- CNC Machined frombillet 6061 aluminum
- Supports shock tower
- Works best with FLM tower
|
 |
1/8 Scale Stampede Chassis
- Machined from billet 6061
aluminum
- Extended 2.000" longer
than stock
FLM22350 $55.00
|
