 |
Aluminum Tranny
Case FLM20000
-
Made from aircraft quality aluminum for
durability and strength.
-
CNC Machined for exact tolerances
-
Replaceable Nitro style arm mounts
- Includes 1
degree arm mounts
Requires slight mod. to stock chassis (you will
need to remove 1/16" from the nubs that stick up
at the rear of the chassis)
Now inclued wheelie bar mount
$54.00
|
|
|
Aluminum
Tranny Case FLM20500
-
Machined from
billet 6061 aluminum
-
CNC machined
to exact tolerances
-
Designed to
use Nitro style arm mounts
-
Includes 4
degree arm mounts and all necessary hardware
for a direct fit
-
4 degree arm
mounts represent the amount of toe in or
out, typically with more toe in,the truck
under hard acceleration will move in a
straight line therefore making it easier to
control
-
Requires slight mod. to stock chassis (you
will need to remove 1/16" from the nubs that
stick up at the rear of the chassis)
Now inclued wheelie bar mount
$54.00
each
|
 |
FLM21010
Rear Adjustable Arm Mount 4 deg
4 degree arm mount works well for carrying
a straight line under heavy acceleration. But you will
suffer in the top speed department. When exiting a corner or
under full throttle take offs, the rear wheels are angled in
4 degrees to help keep the r/c in a straight line when the
tires break loose.
$12.50 a set
|
|
|
FLM21000
Rear Adjustable Arm Mount 1 deg
Fits FLM Tranny cases
1 degree arm mount works well for straight
line speed. But you will suffer in the traction department.
When exiting a corner or under full throttle take offs, the
rear wheels once they have lost traction will cause the rear
end to kick out to one side or the other.
$12.50 a set
|
|
|
|
 |
|
 |
Adjustable Front Bulkhead FLM24500
-
Machined from
billet 6061 aluminum
-
Adjustable design
allows an extra .200"(5mm) wheelbase
-
Replaces weak
stock bulk
-
Heavy Duty design
-
Includes all
necessary hardware for a direct fit
$24.00 each
|
 |
Front
A-Arms
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations.
-
Fits Nitro/Electric Rustler and Stampede
FLM24000
$18.00
|
 |
FLM25550
- Made in the USA
- CNC Machined frombillet 6061 aluminum
- Supports shock tower
- Works best with FLM tower
|
 |
Front Shock Tower
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
-
Multiple shock mount locations
-
Repalcement cost $6.00
-
Fits Nitro/Electric Rustler and Stampede
FLM25000
$17.00
|
 |
Rear A-Arms
-
Made from aircraft quality aluminum for durability and
strength.
CNC Machined for exact tolerances
Multiple shock mount locations
Fits Nitro/Electric Rustler and Stampede
FLM26000
$24.00
|
 |
Rear
Bearing Carriers FLM26900
$18.00 pair
|
 |
Electric Caster Blocks
-
Made from aircraft quality aluminum for durability and
strength.
-
CNC Machined for exact tolerances
- Replaces
the stock c-hub
FLM27500
$15.00
|
 |
Drag Link FLM27510
-
Machined from
bilet 6061 aluminum
-
Black pieces in
photo are steel bushings for smooth steering and
long life
-
Includes all
necessary mounting hardware
-
Replaces stock
drag link
$7.50
each
|
 |
Steering Bell Crank
FLM28500
-
Machined from
billet 6061 aluminum
-
Replaces stock
bellcranks
-
Greatly enhances
durability
-
Bearings are
highly recommended but not necessary
-
Includes mounting
hardware
$19.00
per set
|
|
|
|
